Morocco is interested in ATRIY equipment
Moroccan National Federation of Electricity, Electronics and Renewable Energies FENELEC visited the production facilities of ATRIY. It is the largest specialized association in Morocco, uniting 690 companies that represent 95% of the electrical engineering and electrical equipment market in the country. During the inspection, the members of the FENELEC association appreciated the company's high technology and full production cycle, especially the installation of chip components on a modern automatic line and quality standards. ATRIY specialists presented the manufactured equipment as well as new developments.
Following the visit, the parties confirmed their readiness for close cooperation in the use of ATRIY equipment at Moroccan energy facilities.
ATRIY's equipment is in demand in the world
ATRIY participated in the Middle East Energy (MEE 2025), the largest energy exhibition in the Middle East, which brought together more than 1.6 thousand of exhibitors from 170 countries this year.
The company's specialists demonstrated proven digital and integrated solutions, as well as novelties for the energy industry to more than 200 potential partners from 50 countries: Peru, Nepal, Saudi Arabia, the United Arab Emirates, the Philippines, Ecuador, Morocco, Kuwait, Bulgaria, etc.
The visitors to exhibition were highly interested in fault passage indicators for overhead and cable lines, an automatic power supply restoration (FLISR) system based on intelligent disconnector IDD and the KOMORSAN-FLISR software package. The integrated solution automatically restores power supply after failures occur in distribution networks, quickly isolates damaged areas and restores power to adjacent network sections.
The FLISR system is effective for power facilities of electric grid and resource-supplying enterprises.




We invite you to The Middle East Energy 2025
Dear partners!
We invite you to our booth H5. A40, where we will present our new products as well as proven digital and complex solutions for Energy industry:
- equipment for monitoring and diagnosing overhead lines, including Fault Passage Indicators powered from the line and sensitivity to emergency currents from 0.2 A;
- advanced solution for fault detection Lodestar CL0.5 BM for registering of faults is based on special intelligent algorithm, that makes possible to detect PtG fault and its direction from 0.5A;
- short-circuit and earth fault Indicator Lodestar PT2 intended for detection of fault localization in overhead and cable power distribution lines of 6-35 kV;
- updated line of Lodestar FM feeder monitors for quick accident search and separation of damaged part of the power line;
- software solutions for air and cable line monitoring and control;
You will have the possibility to test the System of Automatic Network Recovery (FLISR) on the basis of Intellectual Disconnector IDD, fault passage indicators and hardware-software complex KOMORSAN.
About the event:
The Middle East and Africa’s most comprehensive energy exhibition.
Middle East Energy has a 45+ year legacy of bringing together key stakeholders within the energy sector; to network, debate, and form relationships in an industry that’s ever-changing.
The 49th edition of Middle East Energy will bring together 1,100 exhibitors, 3 powerful conferences, 5 product sectors, and an exclusive VIP programme, all under one roof! Join 40,000+ energy professionals from 07 - 09 April 2025 at Dubai World Trade Centre, UAE.
Let’s plan our meeting in time when you comfortable.
Date: 07-09.04.2025
Venue: Dubai World Trade Centre, Dubai, UAE
Fault indicators for high-voltage lines Lodestar CL HV series
Short-circuit indicators for overhead high-voltage lines Lodestar CL HV series.
The devices are designed to determine the damaged section on overhead lines of high-voltage distribution networks with one-way and two-way power supply.
The devices register interphase short circuits and single-phase short circuits, determine the direction of the emergency current flow and indicate to the emergency response team the direction of the search for the fault point, which allows for a quick search for the faulty section.
Short-circuit indicators for overhead high-voltage lines Lodestar CL HV series.
The devices are designed to determine the damaged section on overhead lines of high-voltage distribution networks with one-way and two-way power supply.
The devices register interphase short circuits and single-phase short circuits, determine the direction of the emergency current flow and indicate to the emergency response team the direction of the search for the fault point, which allows for a quick search for the faulty section.
FPI ATRIY operates in the electricity grids of the Philippines
A batch of 300 Lodestar CL25B fault passage indicators has been delivered to the Philippines.
The equipment accurately records the location of damage of the overhead line, does not require self-calculation of settings and allows you to find quickly and eliminate accidents on the line. For quick installation on the line, hot stick tools have been sent along with the devices, which not only facilitate the installation of indicators on the line, but also allow work to be carried out without disconnecting the overhead line from voltage.
The Philippines has a high risk of natural disasters and that is why the requirements of our partners are very strict. ATRIY's fault passage indicators are resistant to hurricane winds, swaying the power lines. They have already shown excellent results in conditions of increased solar radiation and at high temperatures reaching +70 °C. The indicators are able to withstand a lightning strike near the installation site.
ATRIY equipment is integrated into the power system of Panama
The first batch of fault passage indicators has been successfully installed in Panama.
The smart sensors quickly detect an accident on the overhead lines and indicate the direction where the line damage occurred to the staff. The fault passage indicators are equipped with a built-in GSM module, that send information about the event directly to the dispatcher's SCADA system.
Panama's overhead power grids, like in the most of Latin and Central American countries, are affected by various natural factors, including tropical hurricanes, lightning, and high temperatures.
Implementation of modern diagnostic and protection systems for transmission and distribution lines is critically important to ensure reliable operation of the country's energy system.
Expanding our presence in Africa
ATRIY’s specialists conducted a technical seminar for nine Egyptian distribution companies at the Ministry of Energy in Cairo.
Technical solutions for monitoring and control of overhead lines were presented to the chief engineers and leading technical specialists of Egyptian electric grid companies.
Lodestar CL 0.5 BM fault passage indicators aroused a great interest. The smart sensors provide direct data transmission to the SCADA system to the operator and determine the direction in which the accident occurred.
The equipment works confidently on the overhead lines even at +85 °C, under increased wind load and in conditions of sandstorms. It’s optimally suited for detecting any damage on overhead lines with currents from 0.5 A.
Lodestar CL 0.5 BM has already been sent for a trial operation to one of the distribution companies in Egypt. And we truly believe it will exceed all their expectations and show the great performance and effectiveness!


UAV damage detection system
ATRIY Company presents Mission planning module for unmanned aerial vehicles (UAVs).
The software solution is designed for the use of industrial quadcopters in order to obtain visual information about the condition of Overhead line and its elements.
The module imports the damaged section from the main KOMORSAN package into the program for creating flight missions. The Dispatcher can create a mission for the quadcopter and correct the main points on the map of the imported damaged area.
The user can set the speed, altitude and camera direction for each mission point individually. It is also possible to delete any point, reducing the time in flight.
After finishing the editing of the mission, it is uploaded into the quadcopter and the device passes into fully into automatic mode.
The drone automatically takes off from the launch pad, completes the mission and lands automatically.
The software solution is designed the way that the user does not think about the technical features of using quadcopters but solves the main task - telemonitoring of electric power facilities.
The system includes a computer vision module that recognizes elements of the power line infrastructure. This helps the User to identify a potentially damaged element more precisely.
The software solution allows you to:
• Optimize the work of emergency response team in case of black outs, large scale power cuts (determine the order) as well as specify the type of faults for optimal preparation for their clearing;
• Identify defects in supports, foundations, wires, insulators and linear fittings (obvious and potential)
• Check protective zones for potential threats;
• Control construction, specify access ways to power lines in hard-to-reach areas.
Kindly send a request using the feedback form to get more information from our managers.
Merry Christmas and a Happy New Year!
Dear partners,
We wish you a Merry Christmas and a Happy New Year! May this holiday season fill your heart with joy, love, and happiness. Let the coming year bring you good health, success, and many wonderful moments.
Best wishes,
ATRIY"s team
More...
Trade representative office of ATRIY in Morocco
Dear customers and partners! We are expanding our international presence.
We are glad to inform you that Atriy Afrique trading company, the official sales representative of Atriy in Africa, has started its work in Morocco.
Technical equipment and software for overhead and cable lines; transformer substations, systems for determining the location of the power lines' faults with an accuracy of up to 150 meters; monitoring, diagnostics and control of power facilities and others complex solutions.
In addition, we produce equipment that replaces the equipment of the well-known giants, such as Schneider Electric, Siemens, Horstmann, Sicame and others. Our round-the-clock technical support allows you to stay in touch with us at any time to solve complex issues.
Contact us and we will offer you the right solution to improve the reliability of your power facilities.
Reliability of Morocco's energy facilities with ATRIY equipment
ATRIY has been participating in the Elec Expo in Morocco for the second year. This year we showed to our Moroccan partners our new complex solutions, including FLISR system with disconnection of the damaged section of the power line and rapid restoration of the network, equipment for power transformers – On-load tap changer (OLTC) controllers.
We presented our flagship products for monitoring and diagnostics power lines to the guests from India, Somalia, Burkina Faso, Niger, Mauritania:
- Lodestar CL 0.5 BM for overhead lines. It’s equipped with a short-range radio channel and a GSM data transmission channel, which allows to transfer information from the indicators to the customer's SCADA via DNP3 protocol. Lodestar CL 0.5 BM detects the direction of all types of faults and has sensitivity to emergency currents from 0.5 A.
- Fault passage indicators Lodestar CL HVDD with Faraday cage for high voltage lines;
- Feeder monitors Lodestar FM series for quick fault location and separation of damaged parts of the cable lines.
Our Team arranged a technical seminar as a part of the exhibition. High interest was aroused by ATRIY software solutions for overhead and cable lines monitoring and control. This is a Lodestar mobile application for the staff of energy companies. It allows to monitor the operation of devices on the line remotely, as well as configure and control them. Monitoring and control system KOMORSAN shows the accident location on a geographical map and send all information to SCADA system.








ATRIY will present new technical solutions for Electro Energy at Elec Expo 2024
Dear partners!
We invite you to our booth B3b, where we will present our new products as well as proven digital and complex solutions for Energy industry:
- equipment for overhead lines monitoring and diagnostics, including Fault Passage Indicators powered from the line and sensitivity to emergency currents from 0.2 A;
- updated range of Lodestar FM feeder monitors for quick accident location and separation of damaged parts of the power line;
- software solutions for overhead lines and cable lines monitoring and control.
You will have the opportunity to see the latest solutions for overhead and cable lines. This equipment has already proved its effectiveness at the power facilities of large international grid companies.
About the event:
Considered as a reference in Africa, the 17th edition of international exhibition of electricity, lighting, electrical engineering and Industrial Automation Elec Expo will take place in the prestigious Mohammed VI Exhibition Center in El Jadida.
B to B business meetings and conferences national and international professionals will be present during the four days of the Exhibition.
Date: 27 - 30 November 2024
Please book a meeting with our experts at the exhibition now!
Video instruction of installing fault indicators on an overhead power line without disconnecting the voltage supply. Instructions based on footage filmed at an oil company.
Lodestar CL is designed to be set permanently on the line. One indicator per phase is recommended. Using a hot stick tool the indicators can be installed under the live-line conditions with a full safety in regard to an operator.