Lodestar CL25B Master
![Lodestar_CL25_BM_Master_ATRIY](/images/stories/virtuemart/product/resized/Lodestar_CL25_BM_Master_ATRIY_300x300.jpg)
![Lodestar_CL25_BMaster_Slave_ATRIY](/images/stories/virtuemart/product/resized/Lodestar_CL25_BMaster_Slave_ATRIY_300x300.jpg)
![Lodestar_CLBM_shema_master](/images/stories/virtuemart/product/resized/Lodestar_CLBM_shema_master_300x300.jpg)
Lodestar CL25B Master is a fault indicator which is used in MV power distribution networks. A set of fault indicators Lodestar CL25В Master is designed to localize the damaged area on overheadlines (OHL) of distribution power grids with a voltage of 6-35 kV, a network frequency of 50 Hz or60 Hz, with any type of neutral.
No need in additional pole-mounted RTU device anymore. Indicators communicate with one CL25B Master device via Bluetooth radio signal, then CL25B Master communicates by GSM with KOMORSAN and transmit data to any SCADA-System via IEC 60870-5-104.
Lodestar CL25B Master benefits:
- Brightest Light 360° Visibility — 3 ultra bright wide-angle LEDs provide overlapping fields of light.
- Simple installation — using a single hot stick.
- Dynamically changing sensitivity based on a load current.
- Enhanced resistance to interference conditions in the air.
- On-line monitoring is possible —devices include SMS-gateway.
- Connection to any existing SCADA easily via IEC 60870-5-104 by using KOMORSAN software or by DNP3 directly to SCADA.
Technical characteristics
PARAMETER | VALUE |
Types of registered events | PtP, PtG |
Short circuit current sensitivity | 20 A |
Automatic fault current threshold adjustment | + |
Zero sequence current sensitivity | 20 A |
Detection of direction of zero sequence current flow | - |
Voltage monitoring | + |
General description of devices | |
Overhead line voltage range | 6-35 kV |
Grid's frequency | 50/60 Hz |
Visual indication | - Blinking ultra-bright LEDs; - Detection range up to 100 m (during the day), up to 500 m (at night); - A set of sequences, depending on the capability of the model. |
LED brightness | At least 20000 mcd per LED, 360° view |
Number of alarms stored in the internal non-volatile memory | up to 20 000 |
Remote control (for field config) | Bluetooth BLE (2,4 GHz) |
Remote communication | Lodestar CLXX-Master is equipped with a GSM channel, for transmitting information from the indicators to the data collection server. |
Types of actuation control | - Visual; - By short-range radio channel (handheld remote control) - Remote via Komorsan & SCADA |
Reset display | - voltage restoration; - by timer; - magnet; - from the portable control. |
Indicator health control | - magnet; - portable remote control; - remotely. |
Changing settings (setpoints) | - on the short-range radio channel using a portable remote control; - Remotely using the «KOMORSAN Web-client» software. |
SMS notification | - up to 5 phone numbers; - Composition of the message: GPS coordinates, type of accident, serial number. |
Reading GPS coordinates | Yes |
Time to prepare the kit for repeated triggering | no more than 3 sec. |
Integration with SCADA systems | - Connection to any existing SCADA easily via IEC 60870-5-104 by using KOMORSAN software; - Built-in GSM modem (for Lodestar Master FPI); - Data transmission to SCADA system using DNP3 protocol. |
Source of power | - 3 removable lithium batteries (19 Ah) in Lodestar CLхх Master; - 1 removable lithium battery (19 Ah) in Lodestar CLхх S. |
Total indication time | > 2000 hours |
Indicator life | 130000 hours |
Battery life (in standby mode) | 8-10 years |
Thresholds | |
Absolute current threshold | 20÷1000 A |
Differential current threshold in A | 20÷500 A |
Differential current threshold in % | 50÷500% |
Current withstand (IEEE495, 4.4.7) | 25 kA/500 ms |
Inrush current restraint | 0-200 ms |
Setting the reset timer | Arbitrarily from 1 hour to 8 days |
The minimum duration of the emergency process | 0,02 s |
Exploitation | |
Installation location | On the overhead line (conductor) |
Conductor diameters | 5-40 mm |
Installation on live line | + |
Temperature range | Operating at an ambient temperature from - 40 °С to + 85 °С |
Protection class | IP 68 according IEC |
Impact of climatic environmental factors | - Resistant to UV radiation; - Resistant to wind load of 40 m/s without ice and 23 m/s with ice with 35 mm wall thickness. |
Impact of mechanical factors | - Corresponds to exploitation group M1; - Resistant to galloping. |