OLTC Controller UP-100
 +971 555-998-004

OLTC Controller UP-100

Description

On-load tap changer (OLTC) controllers are the main part of the power equipment monitoring and control system. They continuously control status of switching devices of transformers with smoothly or sharply changing loads at 35-750 kV substations.

Controllers UP100 operates with any type of sensors of OLTC drive position without additional adapters. Additional adapters are not needed.

Exploitation of controllers are comfortable for substation personnel due to availability of separate screens displaying information on OLCT drive’s taps and information on transformer’s parameters. They are connected to transformers with nominal secondary voltage 100V and nominal secondary current 1A or 5A.

Combination of controller and indicator functions results into multiple enhancement of operation control’s OLTC electrical drive reliability additional adjustment settings emergency diagnosis settings space saving on the control switchboard. Dimensions of the devices are 144?144?90mm. They could be supplied in several modifications: with digital or analogue outputs or with analogue output (0…20 mA).

UP100 benefits:

• Control of commands execution and operability of switching unit of OLTC;
• Blocking of OLTC drives in case of:

o Detection of overload;
o Detection of three U0 exceedance;
o Decrease of Voltage below Umin;
o ?xternal relay blocking signals are received;

• Emergency alarm for blocking the operation of the of OLTC drive;
• OLTC drive operability control;
• Changing of device’s internal settings and operating mode. Rapid change of setpoints maintaining the voltage from one value to another;
• Transmitting current existing parameters, configure and modify setpoints through digital interfaces, USB/RS-485 or analogue interface “Current loop” in SCADA.

UP100 measures parameters of input analogue signals:

• Linear voltage of the section;
• Voltage of zero sequence of buses section;
• Input current of one of the bus section phases;
• Input current for one of the phases via the busbar section switch.

Documentation is provided upon request to the company's clients. Please fill in the form to send a request:

+

By sending this form, I consent to the processing of my personal data.



Our customers

Contact Us

  Office 2107, Iris Bay Tower - Al Mustaqbal St - Business Bay - Dubai - UAE

 

  +971 555-998-004

Get Product Updates