DP-5
| PARAMETER | VALUE |
| Overall dimensions, mm | 27x88x77 |
| Resistive output | - |
| Total sensor resistance, Ohm | - |
| Analog voltage output, V | - |
| Analog current loop output, mA | - |
| RS-485 digital output | - |
| BCD output | + |
| Drives | EM-1, СМА-7, СМА-9, SHM, MR, ED |
| Total rotation angle, ° | - |
| Rotation angle accuracy, ° | - |
| Supply voltage, V | 5/24 ± 5% |
| Service life, years | not less than 15 |
Drive position sensor DP5 is designed to determine actual transformer tap on load. This sensor can be connected to SMA-7, SMA-9, SHM, EM-1, MR and ED drives with the number of contacts corresponding to the number of drive positions. The sensor converts OLTC step number into BCD code. Sensor DP5 has a BCD-output to deliver transformer tap data to UP 25 OLTC Position Monitors (to display the OLTC step number on the control switchboard) or to SCADA-system.
Related Products and Accessories
OLTC Position Monitor UP25
OLTC Controller UP-100
OLTC Controller UP-200
OLTC Position Monitor UP2x series
